Universal Indoor Speaker unit
flexible indoor alerting with modern computing power
- Indoor units: MNS systems typically cover large outdoor areas but it is also important to alert people inside the buildings. The UNI-ISU is a successor to ATI’s existing Indoor Speaker Unit (ISU) and offers customers more intelligent, flexible solutions to indoor MNS.
- Large outdoor units (Giant Voice): ATI offers the High-Power Speaker Station (HPSS) with 1600 or 3200 watts of power to project alert tones or voice messages over a wide area. These are available in fixed pole mount, transportable or trailer mounted units.
- A robust communication and control backbone: this is provided by ATI’s award winning REACT5000 Central Control Unit (CCU) and MassAlert software which provides an intuitive graphic display of the customer’s system. These support a number of communication options to ensure a reliable system.
The Universal Indoor Speaker Unit (UNI-ISU) provides flexible answers to critical indoor Mass Notification requirements
The base configuration of the UNI-ISU includes the ICG, a basic power supply and batteries. This can be enough to support a simple interface to 3rd party units such as a PA system
- a 400-watt amplifier to drive speakers (70-volt or 8-ohm outputs)
- an expanded IO board with additional relays and inputs
- a variety of modems and media converters for flexible IP communications
- a power converter and interface to support a 25-watt UHF/VHF radio for longer distance communication
- Solar Charger Controller. Although primarily an indoor unit the UNI-ISU is available in a stainless-steel cabinet for outdoor use where solar power can be a convenient option.
- Remote LOC (Local Operator Console) interface. The LOC provides a small LCD screen and membrane switch panel for local control
Flexible Control Options
The UNI-ISU can be controlled and monitored entirely from the remote CCU where local control is not desired. However, the unit can also be equipped with one or more LOCs. The Local Operator Console allows local control and activation even if communication to the CCU is interrupted and usually includes a microphone for local live PA.
Multiple LOCs may be connected to one UNI-ISU depending on power and distance restrictions. A large building may have multiple units. An LOC attached to one UNI-ISU can trigger all the units in that building without going thru remote CCU, again improving system resiliency.
Multiple communication options can connect the UNI-ISU to the Control Station including IP links (Ethernet, optic fiber, cell modem and satellite modem) as well as UHF/VHF radio. While requiring a licensed frequency and having limited bandwidth, 25-watt UHF/VHF radios allow system control over a fairly large area independent of 3rd party infrastructure such as wired network, cell towers or WiFi access points. ATI also supports having multiple communication paths (for example Ethernet LAN and UHF/VHF radio) operating simultaneously in parallel for the very highest system reliability.
Flexible Alert Options
The main purpose of these units is to provide building occupants with alerts and information in emergency situations, typically using prerecorded messages or live PA. The UNI-ISU can be ordered with an amplifier which can drive a large number of 70-volt wall or ceiling speakers in buildings that do not have installed voice capability.
In buildings which already have a voice enabled Fire Alarm system or a PA system, the UNI-ISU can assert a relay to enable the 3rd party unit and provide line level audio into an auxiliary input. It can be equipped with additional relay outputs and inputs for contact closures which can be configured to provide control and monitoring of various external equipment such as HVAC shutdown, gate control, perform handshaking, etc. Multiple activation sources can be assigned priorities that match system requirements.
The UNI-ISU can also be configured to drive strobes where visual alerting is required. It is also an option to drive digital signs to provide text messages in addition to the voice alerts.
The increased intelligence and modularity of the UNI-ISU compared to the older units provides more options for meeting the customer’s needs in a flexible and efficient manner. This offers improved indoor MNS capability. Along with the HPSS for outdoor needs and the REACT5000 and MassAlert for control and monitoring, ATI can provide customers with complete indoor/outdoor wide area MNS solutions.
* ADDITIONAL HARDWARE/FIRMWARE MAY BE REQUIRED.
** ONLY IN WEB AND DESKTOP MASSALERT® CLIENT.